Posted in September 6th, 2010
I had brought the transmitter’s controller back to Laramie for some additional troubleshooting. Testing revealed that the issue was not in the controller. I spent some time looking at the schematics for the transmitter and had a theory…There was one other place where the issue could be occurring now that I had ruled out problems […]
read more from this topic.....
Posted in September 3rd, 2010
Earlier this week our Rock Springs transmitter went off the air. I was out of town but sent one of our other engineers to check it out. He wasn’t able to diagnose the issue with the main transmitter but was able to get our HD transmitter at the site on the air in analog mode […]
read more from this topic.....
Posted in August 26th, 2010
After adding HD2 and HD3 to 91.3 KUWT, it was time to rebuild the translator in Riverton so it could rebroadcast Jazz Wyoming via KUWT-HD3 as an analog signal to the people of Riverton and the surrounding area. It’s a gorgeous day to do this install…A butterfly sits on a thistle at the site…
read more from this topic.....
Posted in July 30th, 2010
Our Copper Mountain transmitter site (KUWT, Thermopolis) had been giving us a number of issues for the past few months. These issues were somewhat inconvenient to say the least while I was trying to add both an HD2 (Classical) and HD3 (Jazz) service to the site. The latest technical issue was a failed power supply…This […]
read more from this topic.....
Posted in July 27th, 2010
Our KUWC station in Casper, Wyoming has been broadcasting in HD for quite a while. If you aren’t familiar with HD Radio technology it allows a digital signal to be broadcast alongside the existing analog radio signal. The new digital signal can also carry additional channels of audio. KUWC had been broadcasting an HD2 signal […]
read more from this topic.....
Posted in June 3rd, 2010
Our site on Copper Mountain experienced a failure of some HD Radio equipment. I traveled to the site to attempt to restore HD service. One dead NE-IBOC signal generator…My only real recourse is to replace the hard drive and re-load the software. The manufacturer no longer has parts available for these units.
read more from this topic.....
Posted in April 20th, 2010
WPR broadcasts in HD on many of its stations. One of the most exciting aspects of this technology is the ability to deliver multiple channels of content on a single FM frequency. Unfortunately there is a limited amount of digital bandwidth available for the additional channels. About 96 kbps is available for audio or data. […]
read more from this topic.....
Posted in April 16th, 2010
About a year or so ago we placed a new station on the air in Rawlins. I had not been satisfied with the performance of the remote control that we installed so I decided to try another model. The road to the site was still somewhat muddy and covered in snow. I was not able […]
read more from this topic.....
Posted in March 2nd, 2010
The Federal Communications Commission recently approved up to a 10 fold increase in the digital power allowed for broadcast stations. This is a big deal, particularly for lower power broadcasters (like many of my stations) where every watt counts. I applied for permission to upgrade our Casper station. The hardware was already capable of the […]
read more from this topic.....
Posted in February 5th, 2010
After spending the night in Newcastle, I headed down to my site in Douglas. This site had suffered a UPS failure. It had been bypassed earlier this year but needed to be replaced to protect the equipment. I also had some minor remote control wiring to do at the site. At the site in Douglas…This […]
read more from this topic.....